Auto Wash 365 Auto Wash 365 Auto Wash 365

Auto Wash 365

The Auto Plant Wash 365 is one of the latest products to emerge from ATL. It is a simple and easy to use control, allowing the user to wash their parlour automatically.

It can be used on small to medium sized parlours.

Download leaflet

Display 365 Auto Plant Washer Auto Wash 365

The Auto Plant Wash 365 from ATL is a simple and easy to use wash controller that washes the parlour automatically after each milking. It provides more consistent and efficient cleaning using less chemical than manual washing irrespective of the operator. The system is programmable and it's versatility provides an excellent wash to any type of small to medium size milking parlour.

Control Features:

  • Fully editable programs and settings allowing Auto Wash 365 to be optimised for every milking parlour
  • Large LED display showing washing status
  • 4 wash programs, including dedicated pre-milking key
  • Complete fault code log saved in memory for easier fault traceability
  • 3 different hot and cold water valve sizes - 10mm internal, 13mm internal and large bore external water valves

Pump Unit Features:

  • Separate pump unit keeps electronics and chemicals apart
  • Peristaltic pumps accurately dispenses chemicals at up to 0.8 litres per minute - up to a maximum of 3 pumps
  • Automatic chemical dispensing reduces operator handling of chemicals to a minimum

Other Features:

  • Temperature sensor for wash trough
  • Stainless steel pressure level sensor in wash trough - give ultimate control and enables different water levels to be used in different washing cycles and programs
  • Controls 1 hot water valve and 1 cold water valve - either 10mm or 13mm 12vDC valves
  • Vacuum operated 3 way diversion valve in return line for diverting to drain or wash trough
  • Controls up to 2 vacuum pumps - staggered start of vacuum pumps standard to ease load on 1 phase systems - requires motor starter for each vacuum pump (optional
  • Link to ATL MIlk Meters, Milk Pump Control and AirBlast Control to change mode between wash, milk and idle via one button press
  • Milk pump on and off output - 12vDC - controlled via relay/contactor (not included)
  • Wash slugger control on and off output - 12vDC - controlled via relay/contactor (not included)
  • Master pulsation control on and off output - 12vDC - controlled via relay/contactor (not included)
  • Automatic drain valve output included - 12vDC - vacuum or compressed air operated automatic drain valve(s) optional
  • Wash safety switch output included - 12vDC - wash safety switch optional
  • Milk safety switch output included - 12vDC - milk safety switch optional
  • Wash trough drain valve included - 12vDC - drain valve and solenoid not included
  • Spare output included - 12vDC

Benefits:

  • Easy to use - just push a program button and the unit will automatically clean the milking parlour for you
  • Electronic system - optimise settings to suit any small or medium sized parlour
  • Consistent cleaning control - temperature, chemical dosing and time are all automatically controlled irrespective of the operator
  • Automatic dosing of liquid detergents - maximises operator safety and prevents excessive use of detergents